lowering spring kit for VOLKSWAGEN Caddy III

Lowering spring kit ST Suspensions for VOLKSWAGEN Caddy (2K) 2WD 1.4, 1.6, 2.0i, 1.9TDI, 2.0SDi, 2.0TDI

Years: 03/04-

Compatible vehicle power (in kW): 55-103

Maximum permitted front axle weight (in kg): -1100

Maximum permitted rear axle weight (in kg): -1200

Possible front/rear lowering (in mm): 40/40

Technical note to consider before ordering:

FOR models with a 50mm diameter strut on the front axle.

Models equipped with twin leaf springs at the rear must replace them with single leaf springs. Available from the manufacturer: (for Caddy VW REF. 2K0 511 151N, for Maxi Caddy: VW REF. 2K3 511 151E)

Suspension kits not suitable for vehicles equipped with Xenon headlights: Only the lowering spring kit can be offered.

Suspension kits not suitable for vehicles equipped with Xenon headlights: Only the lowering spring kit can be offered.

Please note:

ST Suspensions shock absorbers and springs are supplied in sufficient quantity to equip the vehicle. They fit in place of the original suspension, without modification. For example, if you only have springs at the rear as original equipment, this will also be the case with these ST Suspensions kits. Remember to use original strut mounts for installation. ST Suspensions kits are supplied bare (shock absorber cartridges and/or springs as applicable), unless an accessory essential for lowering is required.

Shock absorber cartridges, however, are sold individually! You will therefore need to order at least 2 to equip an axle.

WARNING: compatible power ratings are expressed in kW (kilowatts). To find the equivalent in hp, convert this value (1 kW = 1.36 hp). Online converters are also available.

ST Suspensions is a brand of KW, and products under this brand are manufactured by KW.

For any other information, please feel free to contact us using the contact form.